Welcome to SolventCartridges.com  
HomeProductsTech SupportFAQContacts
.

Multi-Liter JV3 Chip

The World's First and the Only Multiple-Liter Chip for Mimaki JV3

The ultimate solution to using third-party inks on Mimaki JV3 printers.


Multi-Liter JV3 Chip Product Information

Multiple-Liter JV3 Chip programmed for 20 liters
Comparison Table of our JV3 Chips
Product
Firmware Compatibility
How many liters it lasts
Notes
Disposable 220ml and 440ml chip
7.10
0.44 to 0.5 liters
Can be mounted on a disposable cartridge.
Rechargeable chip
7.10 and future releases
Unlimited. One recharge is good for 0.5 liters
Can be mounted on a Lite-S refillable cartridge or on any bulk system. Must be recharged.
Multi-Liter chip
7.10
10, 20 and 30 liters
Can be mounted on a Lite-S refillable cartridge or on any bulk system. Does not need recharging and it can permanently stay in the cartridge due to its self-resetting function.
Multi-Liter Unlimited chip
7.10
Unlimited

* An Unlimited Chip brings the cost of chips per liter close to zero.

How much are you paying for chips?

Some people are known to pay as much as $10 for one 440ml chip. That increases their cost of one liter of ink by at least $20 - the amount comparable to the cost of the ink itself! Our multi-liter chip offers you great advantages:

  • It significantly reduces your running cost.
  • It permanently stays on a cartridge completely eliminating the need to change chips and allowing an uninterrupted production. Constant connection to the printer ensures a long life of the chip.
  • It stops your dependence on your current supplier of the chips.
  • You won't need to worry about running out of chips, lead times and their availability, shipping costs, customs clearance and occasional malfunction of the chips.

 

 

All trademarks recognized. Copyright © 2005-2006 Solvent Cartridges Inc.